|
A
fully-mastered technology for finely-tuned rigidity
-
3D Headtube is a structural extension of the
headtube.
It keeps the headset bearings close to the stem,
maximising rigidity and steering accuracy even
when the rider chooses an upright position. With
its stiffness intact, the stem/bar combination
favors hard accelerations. Three positions are
available: 0mm,10mm and 20mm.
-
HDS:
the Horizontal Dual System is a design that
varies the shape and size of the various frame
sections according to the stresses experienced
by each. Power transfer is remarkably efficient,
response is immediate.
-
Internal S3:
the S3 principle, applied internally.
Reinforcements inside the frame vary according
to frame size, putting extra material only where
necessary, reducing needless weight while
improving stiffness for a complete power
transfer.
-
Easy positioning,
accurate trajectories, AFS road geometry: the
Argon 18 Fit System is based on years of
knowledge about the geometries required tomake a
bike most efficient and enjoyable to ride. This
is why Argon 18 bikes are more comfortable,
maximizing the rider’s potential.
|
